If you have ever dealt with a concrete mixer pump on the job field, you know it is one of the most dangerous pieces of machinery. However, many people forget this fact and end up losing arms and fingers while trying to clean it out. It is essential that all work personal know that they should not try to enter the outlet valve, hopper, or lubrication box while the machine is running. Most people tend to get injured on the work site because they start maintenance on the machine because they believe the remote is off. Sadly, what happens is they turn the machine off at the pump and while they are working on the machine, they lean up against the power button and machine is turned on, leaving the operator with a severe injury. It is an accident that happens very fast.

concrete mixer pump

Before any f your operators begin work on a concrete mixer pump it is essential that they have read all safety material and been trained thoroughly. If the pump does need to be serviced, it is essential that the concrete trailer pump for sale is shut down, the key is removed, and the pressure reads at zero.

When summer arrives, there are many jobs available that require the use of a concrete mixer with pump. Before this season hits it is best to service all of your pump equipment. When you have more jobs available, this means more money for the company. It is important to reinvest some of that into safety and maintenance. Far too many companies disregard this aspect and that is when accidents happen.

mixer pump

Take the time to check hoses for holes and weak spots. Look at the ends of the hoses to ensure they are in satisfactory condition. Thin metal can be a big concern for safety issues. Look at the reducers as well as the ends of the reducer. An easy check is to lightly tap the reducers with a hammer. If you hear a bright ting, that means that the metal is becoming weak and worn out. When this happens to the reducers, it is well past time to replace it. These are simple little checks that can be done on a weekly basis. It is much easier to check these aspects of your machines than deal with injuries or death. It is far to easy for people to get injured or killed while working with a best ideal concrete mixer and pump.

concrete pump mixer

It is best to start off the season with new hoses and clamps. When you start a new job, be sure that the hose is rolled out from one end and rolled back from the other end. This allows you or another to inspect the hoses on a daily basis. If you do find a hose that has gone bad, mark it and set it aside. From here it can either be cut into two hoses or tossed in the trash. If you have a concrete hose that has become clogged, it is an accident waiting to happen. The same is true with reducers and elbows. Don’t risk the chance of an accident while trying to save money or get a job done fast. Inspect, invest, and maintain your equipment. Click here: http://bestonconstruction.com/small-concrete-pump/.